Equipment

A list of the basic materials used to produce drawings and models and where to get them. If you need help finding materials just ask.

Swann Norton Scalpel

Purhcase these from your local art supply shop along with a large number of 10A blades. Blades need to be replaced frequently to ensure clean cuts.

Steel Ruler

Use with the above scalpel to ensure straight cuts (don't use a plastic ruler)! Can be purchased from your local art supply shop or hardware store. Best to purchase a cutting mat as well.

Grey Board / Backing Board

Thick grey card normally sold in art supply shops. Much neater than foam board.

Glue

For model making I only use 'Bostik All Purpose Extra Strong Clear Adhesive' it dries clear and is good for grey board. I buy it from Wilkinsons but you can get it from B&Q and similar places. I also use spray mount and photo adhesive for paper.

Dental Plaster

Use in place of plaser of paris. Moulds can be made from foam board and lined with masking tape. Use sand paper to smooth finished plaster. I'm currently trying to find a good source for this!

Hinges and Catches

Purchase from B&Q or similar hardware store. Wilkinsons also have quite a good selection.

Ink Stamps
Stamps that say things like 'Confidential' & 'Copy' are available from WHSmith, the Post Office and Staples.

Paper

Choose the paper you draw and print on very carefully. Most paper will go through an ink-jet printer. Good quality thick catridge paper can be purchased as sketch pads from your local art supply shop and then used in an inkjet or laser printer. Be careful when using the office printer as very thick paper can jam the machine, so make sure you know how to get the paper out!

Experiment with different papers. I have used lined paper, graph paper, manuscript paper, old yellow pages, envelopes, luggage labes, old shirts....

Lugage Labels
Available from WHSmith and the Post Office.

Drawing Ink
I use Winsor & Newton drawing ink to 'splatter' my work. The ink is applied to a Tesco Value toothbrush and then flicked onto the paper.

Glass

Glass can be cut to size by your local glass merchant and looks a lot better than sheets of clear platic in models. Find a local supplier in the Yellow Pages.

To be Continued...